WLS-RS300 Wireless Locating System Receiver (RoHs)

	繁體中文
	English


	~ Available soon ~ (Asia Only)


	WLS-RS300

WLS-RS300 is a 2.4GHz wireless receiver, it is mainly installed in fixed position to receive the 2.4GHz wireless location data of WLS-T01, WLS-T02 and WLS-T11 broadcast. In the other hand, WLS-RS300 is also a wireless converter (called Router) from 2.4GHz to 400MHz. it can effectively use 400MHz high transmittance characteristics to extend the wireless transmission distance, and don’t need add wire between the communication paths. The WLS software in the PC can use transparent function of RFU-400 to poll the wireless location data of WLS-RS300, and then calculate the relative position by the algorithm. The user can simply use the DIP switch and rotation switch to configure the parameter, and don’t need to add wire between the communication paths. It very suitable for use in item tracking, personnel movements, factory regional management and other applications.

back

Supports data conversion from ISM 2.4GHz frequency to 400MHz frequency
Supports 16 segments of RF channels with 2.4GHz and 400MHz
Built in 2.4GHz 3dBi PCB directional antenna
Supports external DIP and rotary switches for easy configuration
Built in a buzzer and supports remote enabling buzz function
Relay Output for Alarm Device

back

Wireless
2.4GHz	Modulation	OQPSK (Offset Quadrature Phase-shift Keying)
	Spread Spectrum	DSSS (Direct-Sequence Spread Spectrum)
	RF Channels	16
	Transmission Power	16±1dBm (Default) / 17dBm (Max.)
	Wireless frequency	2.4GHz
	Antenna	2.4GHz - 3dBi PCB directional antenna
	Transmission Range (Line of Sight,LOS)	100m (Default)
	Number of tags supported	90 (Max., Tag Tx interval is 3 seconds)
400MHz	RF Channels	16
	Transmission Power	19dBm (Default / Max.)
	Wireless frequency	Channel 0~9: 429.8125 MHz ~ 429.9250 MHz Channel A~F: 429.1750 MHz ~ 429.2375 MHz
	Antenna	429MHz – 5dBi PCB directional antenna
	Transmission Range (Line of Sight，LOS)	160m(Default)
	Range of address	1~255 (0x01~0xFF)
LED Indicators
Power		1 LED, Red
400MHz Transmitted status		1 LED, Green
2.4GHz Received status		1 LED, Green
Power
Required Supply Voltage		100 VAC ~ 240VAC
Power Consumption		5 W Max.
Mechanism
Dimensions (D x H)		Ø 150 mm x 53 mm
Installation		Ceiling /surface mounted
Relay Output
Channels		1 (SPDT, Form C)
Max. Load Current		250 VAC @ 6 A or 30 VDC @ 6 A
Alarm
Buzzer volume		Min. 85dBA(Typical 92)@10cm
Temperature Measurement
Range		0°C ~ +50°C
Resolution		0.1°C
Accuracy		±0.6°C
Relative Humidity Measurement
Range		0 to 100% RH
Resolution		0.1% RH
Accuracy		±5% RH
Environmental
Operating Temperature		0°C ~ +50°C
Storage Temperature		-30°C ~ +75°C
Relative Humidity		10 ~ 90% RH(Non-condensing)

back

Important Note: The receiver of wireless location system be used together with the transmitter and the converter, please refer to WLS-T01, WLS-T02, WLS-T11 and RFU-400.
WLS-RS300 CR	Ceiling Mounting Type Wireless Locating System Receiver with Alarm, Relay and T&H Sensor (RoHs)
Note: Asia Only.

back

WLS-T01 CR	Battery Standard Type Wireless Locating System Transmitter with Help Button (RoHs)
WLS-T02 CR	Battery Standard Type Wireless Locating System Transmitter with the Buzzer (RoHs)
WLS-T11 CR	Charging Card Type Wireless Locating System Transmitter with Help Button (RoHs)
RFU-400 CR	RS-232 / RS-485 to 429 MHz Radio Modem (RoHS)

back